Лазерный принтер EPSON1100 - куда заливается девелопер
Добавлено: 18:25 - 17.08.05
EPSON1100
куда заливается(устанавливается) ДЕВЕЛОПЕР?
куда заливается(устанавливается) ДЕВЕЛОПЕР?
Форум по обслуживанию офисной техники. Вопросы по ремонту, адреса сервисов. Помощь новичкам.
http://www.repair-printer.ru/
Alex K писал(а):Вот те раз????? И кому верить??
Alex K писал(а):Вот те раз????? И кому верить??
When remanufacturing this toner cartridge the customer must USE & MIX both the Absolute Color toner and carrier sold separately
OEM waste carrier is located at the heavy end of the toner cartridge
Uninet Absolute Black® toners are compatible with the OEM carrier but is not recommended the reuse of OEM carriers
Recycling instructions:
1-Locate the heavy end of the toner cartridge were the waste carrier box is located.
2-Locate and remove the waste carrier plug with the cartridge facing up to avoid spilling waste carrier
3-Remove the used OEM carrier and properly dispose of it
4-Locate and remove the second toner hopper plug located at the end of the waste hopper bin
5-Clean and vacuum the inside of the toner cartridge both the toner hopper and carrier waste hopper (Note: make sure not to damage the inside metal contact or the clear window in the waste hopper)
6-Open Uninet Absolute Color ® toner bottle to be able to drop the use OEM carrier inside
7-Drop the Uninet Absolute Color carrier into the Uninet Absolute Color ® toner bottle
8-Close the Uninet Absolute COLOR ® toner bottle with Uninet carrier inside and shake it well to make an even carrier distribution.
7-Once the cartridge is clean fill the toner hopper with Absolute COLOR® toner mixed with carrier.
8-Instal the OEM toner hopper plug to sell the toner reservoir
9-Instal the OEM waste hopper plug (The waste hopper section should be clean and contain no carrier or toner)
10-Make sure that the clear window located on the side of the cartridge is clean and that the waste toner hopper bin inside the printer it is not full