Страница 1 из 1

Лазерный принтер EPSON1100 - куда заливается девелопер

Непрочитанное сообщениеДобавлено: 18:25 - 17.08.05
Гость
EPSON1100
куда заливается(устанавливается) ДЕВЕЛОПЕР?

Непрочитанное сообщениеДобавлено: 09:18 - 15.09.05
KudesNIK
Он отдельно не "заливается", а идёт в комплекте вместе с тонером.

Непрочитанное сообщениеДобавлено: 10:32 - 15.09.05
Сервис-Центр ДЖЕСТ
 êîìïëåêòå îí íå èäåò. Íóæíî äîêóïàòü îòäåëüíî è ñìåøèâàòü ñ òîíåðîì.

Непрочитанное сообщениеДобавлено: 22:24 - 15.09.05
Alex K
Вот те раз????? И кому верить?? :|

Непрочитанное сообщениеДобавлено: 23:36 - 15.09.05
admin
Alex K писал(а):Вот те раз????? И кому верить?? :|

один сказал, другой поправил

Непрочитанное сообщениеДобавлено: 20:34 - 16.09.05
Slv01
Alex K писал(а):Вот те раз????? И кому верить?? :|


никому! покупай оригинальную расходку и делай всё в соответствии с руководством пользователя

Непрочитанное сообщениеДобавлено: 15:23 - 23.01.06
xM
Читайте первоисточник и откроется Вам
When remanufacturing this toner cartridge the customer must USE & MIX both the Absolute Color toner and carrier sold separately
OEM waste carrier is located at the heavy end of the toner cartridge
Uninet Absolute Black® toners are compatible with the OEM carrier but is not recommended the reuse of OEM carriers

Recycling instructions:
1-Locate the heavy end of the toner cartridge were the waste carrier box is located.
2-Locate and remove the waste carrier plug with the cartridge facing up to avoid spilling waste carrier
3-Remove the used OEM carrier and properly dispose of it
4-Locate and remove the second toner hopper plug located at the end of the waste hopper bin
5-Clean and vacuum the inside of the toner cartridge both the toner hopper and carrier waste hopper (Note: make sure not to damage the inside metal contact or the clear window in the waste hopper)
6-Open Uninet Absolute Color ® toner bottle to be able to drop the use OEM carrier inside
7-Drop the Uninet Absolute Color carrier into the Uninet Absolute Color ® toner bottle
8-Close the Uninet Absolute COLOR ® toner bottle with Uninet carrier inside and shake it well to make an even carrier distribution.
7-Once the cartridge is clean fill the toner hopper with Absolute COLOR® toner mixed with carrier.
8-Instal the OEM toner hopper plug to sell the toner reservoir
9-Instal the OEM waste hopper plug (The waste hopper section should be clean and contain no carrier or toner)
10-Make sure that the clear window located on the side of the cartridge is clean and that the waste toner hopper bin inside the printer it is not full

Непрочитанное сообщениеДобавлено: 13:33 - 30.01.06
Гость
Из неродных есть 2 варианта заправки:
1. Покупается тонер и носитель, затем смешивается в определенной пропорции и засыпается в картридж
2. Покупается готовая смесь из тонера и носителя и засыпается в картридж.

И то и другое найти несложно (в Москве по кр. мере)

Непрочитанное сообщениеДобавлено: 12:24 - 03.02.06
skat
тонет идет одно компонентный туда надо подсыпать 15-30 %порошка (девелопер) и вперед только имей в виду что
девелопер нужен родной он не совместимый, процес простой он добавляется на магнитную кисть а отработанный удаляется в отходник картриджа его надо высыпать. если заправка 2-3 то можно не досыпать его хватит. проверено