• Реклама
 

Лазерный принтер МВ 4016 - горит "индикатор ошибки"

Лазерный принтер МВ 4016 - горит "индикатор ошибки"

Непрочитанное сообщение neos81 » 17:14 - 17.05.06

Вкл. принтер начинается прогрев печки, затем срабатывает двигатель, прогоняет несколько секундж и останавливается, при этом горят лампочки индикатор готовности (горит), и индекатор ошибки (горит), принтер не на что не реагирует. (только крышку поднимаю опускаю, идет опять прогрев и прогон). ЧТО может быть?
neos81
новичок
 
Сообщения: 1
Зарегистрирован: 17:04 - 17.05.06
Баллы репутации: 0

Непрочитанное сообщение valerikv » 03:49 - 18.05.06

1.Power on initialize
2.Cancelling a print job
3.Resetting a counter

Reset the counter
Use the following procedure whenever you want to reset the counter.
1. Turn off the printer.
2. While holding down the Panel button, turn on the printer.
The green "Ready" indicator begins to blink.
3. Keep the Panel button held down, and the "Ready" indicator will start to
blink. After the "Ready" indicator has blinked for about 5 seconds, release
the Panel button.
All two indicators begin to blink.
After all the indicators blink, the printer enters the counter reset mode.
Refer to P.32.
valerikv
новичок
 
Сообщения: 17
Зарегистрирован: 01:03 - 06.05.06
Баллы репутации: 0

Непрочитанное сообщение Гость » 20:28 - 18.05.06

3.Resetting a counter

Reset the counter
Use the following procedure whenever you want to reset the counter.
1. Turn off the printer.
2. While holding down the Panel button, turn on the printer.
The green "Ready" indicator begins to blink.
3. Keep the Panel button held down, and the "Ready" indicator will start to
blink. After the "Ready" indicator has blinked for about 5 seconds, release
the Panel button.
All two indicators begin to blink.
After all the indicators blink, the printer enters the counter reset mode.
Refer to P.32.[/quote]

Пробовал. не реагирует на кнопку. т.е сброс не проходит. Честно говоря этот принетер выплюнул примерно 100 листов и умер
Гость
 

Непрочитанное сообщение Advokat » 10:18 - 26.03.07

Пожалуйчта подскажите что делать! мв 4016 при включении не запускает двигатель а зажигает красный диод наличие бумаги не влияет?
Advokat
 


Вернуться в MB

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 3

  • Реклама
cron